No.437前推式安全切割刀（带刀口稳定夹）
产品订货号:MARTOR-437
Opticut No. 437
Ergonomically styled Cutter for use with plastic sheeting foamed material. For use by right- lefthers. The TEFLON®-coated metal base slides readily across any surface for controlled cutting operations. Blade change within seconds. OPTICUT No. 437: with hold-down clip designed to prevent material build-up ahead of the blade edge to keep fingertips SAFELY away! Push-cut model. OPTICUT No. 436: with reversed hold-down clip. Pull-cut model. OPTICUT No. 435: Same as No. 436, but with additional lateral protector.
OPTICUT安全刀具，适用于切割胶片及泡沫塑料，与切割面接触的金属底板经 “Telfon” 处理，避免因经常磨擦而损坏。切割面入口带稳定夹，让切割作业达最佳较果，适合左手及右手操作者使用。2边 / 4点式刀片可重复使用，更具经济效益。产品通过德国GS安全检测认证。
标配刀片:
Industrial cutter blade No. 37040
with square ends, alloyed carbon steel, deep-edged
length: 43.00 mm
Width: 22.00 mm
Material thickness: 0.40 mm
其它刀片选择
Industrial cutter blade No. 83730（不锈钢刀片）
with square ends, stainless, TiN-coated
length: 43.00 mm
Width: 22.00 mm
Material thickness: 0.30 mm
Industrial cutter blade No. 13730
with square ends, stainless
length: 43.00 mm
Width: 22.00 mm
Material thickness: 0.30 mm
|
